Senior Electronics Engineer - Circuit Analysis & Simulation

Archer Aviation Inc., located in San Jose, California, is revolutionizing the aerospace industry with our all-electric vertical takeoff and landing aircraft. Our mission is to enhance sustainable air mobility by designing, manufacturing, and operating a state-of-the-art aircraft capable of carrying four passengers while ensuring minimal noise output.At Archer, we aspire to achieve remarkable heights, tackling challenging problems while fostering a diverse and inclusive workplace that drives innovation and collective success. We are committed to creating an equitable environment that values our differences and supports every team member.What You’ll DoExecute Worst Case Circuit Analysis (WCCA) and margin analysis on critical control and measurement circuits, including microcontrollers, resolver interfaces, PMICs, power trees, voltage/current sensors, and digital communication protocols (CAN, SPI, etc.).Conduct circuit simulations using SPICE and MATLAB to evaluate designs under varying component tolerances, temperature extremes, and voltage fluctuations.Lead Design Failure Mode and Effects Analysis (DFMEA) for control and sensor boards, collaborating with Safety and Reliability teams to identify and mitigate potential risks.Analyze the impact of single-event upsets and latch-ups on essential system functionalities.Perform electrical stress analysis and component derating assessments.Assist the design team with analytical validation of power management architectures, sensor interfaces, and MCU-based control circuits.Work closely with hardware, controls, firmware, safety, and reliability teams to ensure compliance with aerospace performance and certification standards.Generate technical documentation and analysis reports to support design reviews and adhere to DO-254/DO-160 compliance.

Archer Aviation is a pioneering aerospace company located in San Jose, California, dedicated to the development of an innovative all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission is to revolutionize sustainable air mobility, providing an exceptional travel experience while minimizing environmental impact.At Archer, we are driven by high aspirations and challenging objectives. We recognize that a diverse workforce enhances creativity and innovation, leading us to greater success. We are committed to fostering an inclusive and equitable workplace that embraces our unique perspectives and celebrates the contributions of every team member.Key Responsibilities:Design and develop advanced flight simulation physics models for eVTOL aircraft.Conduct vehicle-level trade studies to inform design decisions.Enhance the fidelity of system electrical, thermal, and performance models using data from lab and flight tests to facilitate vehicle certification.Collaborate with both internal and external suppliers to integrate their systems into our comprehensive vehicle simulation framework.Assist in design and analysis activities to ensure compliance with business and regulatory requirements at a high confidence level.

Astera Labs develops solutions for AI infrastructure, specializing in advanced connectivity technologies. The company partners with hyperscalers and industry leaders to help organizations take advantage of modern AI systems. Their platform combines semiconductor technologies such as CXL®, Ethernet, NVLink, PCIe®, and UALink™ with the COSMOS software suite to deliver reliable, high-performance connectivity. Role overview The Photonics Integrated Circuits Engineer will work on designing and developing photonics integrated circuits as part of Astera Labs' connectivity platform. This role contributes to the integration of advanced semiconductor technologies that support AI infrastructure. Location This position is based in San Jose, CA.

Archer Aviation develops all-electric vertical takeoff and landing (eVTOL) aircraft for four passengers, with an emphasis on low noise and sustainable air travel. Based in San Jose, California, the company is committed to making environmentally friendly mobility more accessible. Archer values diverse perspectives and aims to create an inclusive workplace where everyone can thrive. Role overview The Staff Modeling & Simulation Engineer will advance vehicle modeling, simulation, and analysis for Archer's eVTOL aircraft. This role supports technical development and works across teams to help ensure vehicle performance and safety. Main responsibilities Vehicle performance & modeling: Develop and refine vehicle performance models, conduct trade studies at the vehicle level, and set and validate performance requirements. Handling & maneuvering: Assess flying and handling qualities, determine maneuvering parameters, and verify the aircraft meets responsiveness and safety standards. Dynamics & aeromechanics: Carry out system identification and linearization of complex vehicle dynamics. Analyze aeromechanics and aeroelasticity to support stability. Flight controls support: Support flight control system design, including notch filter development and defining operational envelopes. Simulation & hazard analysis: Characterize aircraft performance and capabilities through simulation, supporting Functional Hazard Analyses (FHAs) at the vehicle level. Data analysis & model validation: Analyze flight test data, identify sources of inaccuracies in models, and improve vehicle physics models. Systems integration: Collaborate with internal and external suppliers to integrate systems into vehicle simulations, including dynamics, powertrain, actuation, sensors, and environmental modeling.

Archer is an innovative aerospace firm located in San Jose, California, dedicated to creating an all-electric vertical takeoff and landing aircraft. Our goal is to enhance sustainable air mobility, designing, manufacturing, and operating an aircraft capable of transporting four passengers with minimal noise production.We aim high and tackle challenging problems, believing that a diverse workforce fosters smarter solutions, deeper insights, and collective success. Archer is committed to nurturing an inclusive and equitable environment that values differences and supports every member of our team.What you will do:Manage Archer's integrated lab environments to support validation and verification processes, including quality assessments, human factors evaluations, and test pilot training.Work collaboratively across internal teams and with suppliers to integrate, instrument, and maintain the configuration of simulation models within a real-time hardware-in-the-loop environment.Develop simulation models of various systems and integrate them into the overarching framework.Create and implement graphical user interfaces to facilitate control of the real-time simulation environment.Support the execution of test plans and automation of testing procedures.

About the RoleBonsai Robotics is on the lookout for a talented Senior Robotics Software Engineer specializing in simulation. In this key role, you will be responsible for developing and managing our sophisticated simulation infrastructure. The successful candidate will design high-fidelity virtual environments that facilitate quick development, testing, and validation of our autonomy stack, thereby minimizing reliance on physical field testing and speeding up iterations across perception, planning, and control systems.What You'll DoDevelop and maintain simulation environments that accurately replicate real-world conditions, including orchards, row crops, uneven terrain, and varying lighting and weather.Create SIL/HIL testing frameworks that ensure comprehensive testing of the full autonomy stack.Establish and sustain high-fidelity sensor models (cameras, GPS/RTK, IMUs, LiDAR) that are calibrated against actual hardware.Develop tools for automated scenario generation, regression testing, and CI integration.Work collaboratively with perception, controls, and platform teams to define simulation needs and bridge the sim-to-real gap.Model vehicle dynamics and terrain interactions for a variety of robotic form factors.

Join Our Innovative Team as an Analog/Mixed-Signal Circuit Design Engineer! At SK hynix America, we lead the charge in semiconductor innovation, crafting advanced memory solutions that power everything from smartphones to expansive data centers. As a pioneering force in DRAM and NAND flash technologies, our mission revolves around driving the evolution of mobile technology, enhancing cloud computing, and spearheading future innovations. Our state-of-the-art memory technologies are vital to today’s most sophisticated electronic devices and IT infrastructure, delivering superior performance and user experiences across the digital realm. We invite visionary minds to join us in shaping the future of technology. At SK hynix America, you’ll collaborate with a team dedicated to pioneering cutting-edge memory solutions while upholding a strong commitment to sustainability. We are not merely adapting to technological shifts; we are propelling them forward with substantial investments in artificial intelligence, machine learning, and environmentally conscious operational practices. As we expand our market presence and push the limits of semiconductor technology, we welcome you to be part of our journey in creating next-generation memory solutions that will define the future of computing.

Archer Aviation is a pioneering aerospace company located in San Jose, California, dedicated to the development of an all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission is to enhance sustainable air mobility by creating aircraft that can transport four passengers with minimal noise and environmental impact.We are driven by ambitious goals and complex challenges, and we believe that a diverse workforce fosters innovation, enhances insights, and propels us toward collective success. Our commitment to an equitable and inclusive environment celebrates the unique contributions of each team member.What You Will Do:Conduct low, mid, and high-fidelity aerodynamic simulations for Archer's eVTOL aircraft.Develop linear and non-linear aerodynamic models to forecast aircraft behavior and performance across the flight envelope.Analyze experimental data from flight tests or wind tunnel experiments to identify model error sources, validate, and enhance aerodynamic models.Create efficient methodologies to integrate flight test data into aerodynamic simulation models of varied fidelity and complexity.Contribute to the advancement of Archer's aerodynamic software stack, optimizing methods and workflows.Collaborate with cross-functional teams and pilots for updates to flight simulator aerodynamic modeling and issue resolution.

Astera Labs offers a Photonics Integrated Circuits Engineer Internship for 2026 in San Jose, CA. This position centers on practical experience with photonic device and integrated circuit design, simulation, and testing. Role overview Interns will contribute to projects that cover various semiconductor processes. The work provides direct exposure to advanced photonics technology, allowing for the application of engineering concepts in real-world settings. What you will do Design and simulate photonic devices and integrated circuits Participate in hands-on testing and evaluation of prototypes Engage with projects involving multiple semiconductor fabrication processes Location This internship is based in San Jose, CA.

Archer Aviation, based in San Jose, California, is at the forefront of aerospace innovation, developing an all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission is to propel sustainable air mobility forward, creating a quieter, greener future for urban transportation. Our aircraft is designed to accommodate four passengers while minimizing noise pollution.We set ambitious goals and tackle complex challenges, believing that a diverse workplace enhances our creativity and insights, ultimately leading to greater success. We are committed to fostering an equitable and inclusive environment that embraces our differences and celebrates every team member.Key Responsibilities:Develop and assess engineering drawings, establish project plans, and source necessary components, materials, and equipment.Oversee suppliers in the design of test fixtures and the execution of testing protocols.Define instrumentation requirements, carry out calibration, and facilitate installation of instrumentation.Lead small test teams to ensure project milestones are achieved.Work collaboratively with cross-functional teams, including design, loads, materials & processes, and analysis, to define tests that confirm design specifications.Create and review company and FAA test plans and reports for static and fatigue testing.Gather and analyze data obtained from testing.Design test stands, fixtures, and data acquisition systems.Establish testing procedures, standard operating procedures, and best practices.Promote safety and adherence to testing protocols in the structural test lab.

Archer Aviation is an innovative aerospace company headquartered in San Jose, California, dedicated to revolutionizing air travel through the development of an all-electric vertical takeoff and landing aircraft. Our mission is to enhance sustainable air mobility, offering a quieter and greener alternative for urban transportation by designing, manufacturing, and operating aircraft capable of carrying four passengers with minimal noise output.We set ambitious goals and tackle complex challenges, firmly believing that diversity within our team is a key driver of creativity and success. Our commitment to fostering an equitable and inclusive workplace ensures that we celebrate and support the unique contributions of every team member.Key Responsibilities:As a pivotal member of the Archer Defense and Advanced Programs organization, you will lead initiatives to incubate, market, capture, and execute advanced programs that are integral to our Archer Defense portfolio, ensuring alignment with technical, cost, and schedule objectives.

Join Archer Aviation, a pioneering aerospace company located in San Jose, California, dedicated to revolutionizing sustainable air mobility through our innovative all-electric vertical takeoff and landing aircraft. Our mission is to provide efficient, eco-friendly air travel, capable of carrying four passengers with minimal noise.At Archer, we aim high and tackle complex challenges. We believe that a diverse workforce enhances creativity and leads to better solutions. We are committed to fostering an equitable and inclusive workplace that values our differences and supports every team member's growth.Responsibilities:Design and develop Flight Simulation Physics Models for VTOL aircraft powered by electric and hybrid electric powertrains.Conduct vehicle-level trade studies to assess various design alternatives.Refine kinematic multi-body flight physics models, including aerodynamics, powertrain, aircraft systems, electrical, thermal, and performance model fidelity, ensuring alignment with lab and flight test data for vehicle certification.Collaborate with internal and external suppliers to seamlessly integrate their systems into our comprehensive vehicle simulation.Perform vehicle-level simulations and performance analyses using Python and MATLAB/Simulink environments.Model potential vehicle failure modes and evaluate their impact on mission objectives.Assist in design and analysis tasks to ensure high confidence in meeting business and regulatory requirements.Conduct simulations for a variety of internal engineering applications, including aircraft loads, structural design, propeller dynamics, and powertrain duty cycles.Generate performance estimates for the aircraft to be incorporated into the aircraft flight manual, flight management systems, and airline operations.

Electric Hydrogen is dedicated to revolutionizing the energy landscape by producing green hydrogen through renewable electrolysis, aiming to decarbonize heavy industry at a cost lower than fossil fuels. Our exceptional team is our most valuable asset, driving our mission forward.We are seeking a highly skilled Senior Power Electronics Engineer to spearhead the development of innovative power electronics products. In this role, you will design and implement groundbreaking solutions that facilitate green hydrogen production, transitioning from prototype to large-scale production. This position requires onsite work at our San Jose, CA facility and involves reporting directly to the Director of Power and Electrical Engineering.

Join Western Digital as a Mechanical Simulation Engineer, where you will have the opportunity to work on cutting-edge technology in a dynamic and collaborative environment. As part of our team, you will contribute to the development of advanced mechanical systems, utilizing simulation tools to optimize designs and ensure product performance.

Archer Aviation Inc. is developing all-electric vertical takeoff and landing (eVTOL) aircraft in San Jose, California. The company aims to advance sustainable air mobility by producing and operating a four-passenger aircraft designed to lower noise pollution. Archer values ambitious engineering, welcomes complex technical challenges, and fosters an inclusive, equitable workplace where every team member's input matters. Role overview The Staff Engineer, Flight Modeling & Simulation, will focus on developing and refining simulation models that support the design, certification, and operation of Archer’s eVTOL aircraft. Key responsibilities Develop advanced flight simulation physics models tailored for eVTOL aircraft. Conduct vehicle-level trade studies to inform design decisions. Enhance electrical, thermal, and performance model accuracy by incorporating lab and flight test data to support vehicle certification. Collaborate with internal teams and external suppliers to integrate their systems into the overall vehicle simulation framework. Contribute to design and analysis efforts to help meet both business and regulatory requirements with a high degree of confidence.

Archer is a pioneering aerospace company located in San Jose, California, dedicated to developing an innovative all-electric vertical takeoff and landing aircraft. Our mission is to enhance the advantages of sustainable air mobility through cutting-edge design, manufacturing, and operation of aircraft that can transport four passengers with minimal noise impact.We aspire for greatness, tackling challenging issues head-on, and firmly believe that a diverse workforce enhances our intelligence, drives superior insights, and ultimately leads us all towards success. We are committed to fostering an equitable and inclusive workplace that values our differences and supports every team member.What you’ll do:Design, develop, and sustain Continuous Integration and Continuous Deployment (CI/CD) workflows and automated testing pipelines for the GNC and Vehicle Simulation teams using tools such as GitHub Actions and TeamCity.Assist in creating and maintaining automated toolchains for generating, compiling, and deploying Simulink and MATLAB code across various environments, including desktop simulations, Hardware-in-the-Loop (HIL) setups, and flight computers for both subscale and full-scale vehicles.Architect new, and oversee existing, High-Performance Computing (HPC) infrastructure to facilitate extensive Monte Carlo simulations, batch regression testing, and parallelized simulations and evaluations.Oversee key software interfaces between the "Virtual Vehicle" (Simulink models) and downstream platforms, including managing Interface Control Documents (ICDs), data dictionaries, and signal mapping to embedded middleware.Create C/C++ wrapper functions, S-functions, and harnesses to ensure smooth integration of compiled code and external libraries within the MATLAB/Simulink framework.Act as a cross-functional engineering multiplier: Utilize your expertise in aerospace principles to contribute directly to vehicle simulation modeling, physics tooling, or GNC integration tasks as required.Serve as the primary technical liaison between the Flight Dynamics & Control (FD&C) team and the Platform embedded software team, ensuring the accurate translation of complex algorithms into real-time execution.

Electric Hydrogen is dedicated to revolutionizing the energy industry by producing green hydrogen to aid in global decarbonization. Our exceptional team is our greatest asset, enabling us to deliver hydrogen from renewable electrolysis for heavy industries at a cost lower than fossil fuels.We are seeking a Senior Staff Power Electronics Engineer to spearhead the development of innovative power electronics solutions. You will play a key role in creating new technologies that support the production of green hydrogen, transitioning projects from prototype to full-scale production.This position is based at our San Jose, CA office, where you will directly report to the Director of Power and Electrical Engineering.

Archer Aviation, based in San Jose, California, is at the forefront of aerospace innovation, creating an all-electric vertical takeoff and landing (eVTOL) aircraft aimed at revolutionizing sustainable air mobility. Our aircraft, designed to transport four passengers, sets a new standard for quiet, eco-friendly flight.We aspire to tackle ambitious challenges and recognize that a diverse workforce fuels creativity, enhances problem-solving, and contributes to our collective success. Archer is committed to fostering an equitable and inclusive atmosphere that values all perspectives and celebrates our diverse team members.

Archer Aviation is a pioneering aerospace company headquartered in San Jose, California, focused on the development of an all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission is to enhance sustainable air mobility by creating an innovative aircraft capable of transporting four passengers with minimal noise emissions.We set ambitious goals and tackle complex challenges, and we believe that a diverse workplace enriches our insights and drives collective success. We are committed to fostering an inclusive and equitable environment that values our differences and supports all team members.Your Responsibilities:Drive the development of key structural airframe assemblies from initial design through certification and into manufacturing.Utilize extensive knowledge of load paths, design best practices, and hand calculations to create robust structural configurations.Provide technical leadership on design concepts, balancing risk, cost, and performance considerations.Ensure structural integrity through static strength, stiffness, stability, fatigue, durability, damage tolerance, and other requirements using hand calculations and finite element analysis, supported by testing.Prepare and disseminate stress analysis documentation.Assist in design reviews and parts release processes.Support component and assembly testing, including the definition, planning, requirements, and report generation.Conduct analyses to support Material Review Board (MRB) activities.Review and authorize design dispositions and analysis substantiations throughout the product lifecycle.Collaborate with design, manufacturing, quality, and supply chain teams to identify process improvements and conduct root cause analyses.Engage with suppliers and engineers across various disciplines throughout the product development lifecycle from prototypes to high-rate production.

Join Renesas Electronics as a Senior Staff Field Applications Engineer (FAE), where you will play a pivotal role in delivering innovative solutions to our clients. You will leverage your technical expertise and customer-facing skills to drive product adoption and assist customers in addressing their technical challenges. Collaborate with cross-functional teams to ensure successful integration of our solutions.